=== TEG-PESTCONTROL ===
Contributors: theeldestgeek
Tags: pest control, pesticide records, termite, service plans, field service
Requires at least: 5.8
Tested up to: 6.7
Requires PHP: 7.4
Stable tag: 1.14.3
License: GPLv2 or later
License URI: https://www.gnu.org/licenses/gpl-2.0.html

The back office for a small pest control company: service plans with initial services and free re-treats, routes, signed pesticide application records an inspector can read, technician licenses, bait stations, inspections, termite WDI reports and bonds, invoices with online payment, and a customer page that shows what was applied.

== Description ==

A pest control company sells a schedule - a quarterly service, a monthly mosquito barrier, an annual termite bond - and the schedule is what earns. What it can lose its license over is the paperwork behind every visit. TEG-PESTCONTROL is built around that: every application is written down from the product registry, signed, and never edited.

* **Customers and properties** - one customer, many properties, one invoice. A property has its type (residential or light commercial), building size and perimeter, structure and structure notes, pets and children on site, alerts, and private access notes and gate / door code (never shown to the customer).
* **Service plans** - quarterly, bi-monthly (every other month), monthly, twice a year, yearly or one-time; general pest, mosquito season, rodent programs, termite, wildlife jobs. An initial service at its own price, then the regular round, stepped by whole months so a quarterly customer stays in the same week of the month. Free re-treats between services up to a limit (or per plan year); the office can book one past the limit as a charged visit, the customer page cannot. Billing per visit or in monthly / quarterly installments.
* **Visits and routes** - visits generated 16 weeks ahead, the technician's day as a route in order with drive time, and a weather button that pushes a whole day to the next working day without touching the plans.
* **Pesticide application records** - from a product registry (name, EPA Reg. No., active ingredient, signal word, restricted-use flag, certification category, label rate, re-entry interval): the technician and their certificate, the amount, dilution and finished mix, target pest and site, area or linear feet, method, temperature and wind, and the customer notice. Signed with a SHA-256 over every field when recorded; never edited - a mistake is corrected by a new record linked to the old one, and both are kept. Customer refusals are signed records too. Refused outright: an uncertified or expired technician, a restricted-use product without a current certified commercial applicator, a category the technician does not hold, a rate above the label. Export per inspection as CSV or a printable record book.
* **Technician licenses** - certificate or registration number, state, type, categories, expiry and optional CEU hours, with expiry warnings. A restricted-use visit cannot be scheduled for a technician whose certificate is not current that day.
* **State rules** - a small rules pack per state, Virginia first. Nothing in it is legal text; every point is marked "unverified - check with VDACS" until confirmed. District of Columbia and Maryland are listed, not yet set up.
* **Bait stations and monitors** - numbered per property, with an optional bar code to scan; checked once per visit with activity and action; history and "needs a look" flags.
* **Inspections** - a checklist per visit (OK / Issue / n/a), findings, conducive conditions, recommendations, photos from the phone.
* **Termite** - WDI / WDO reports as your own record with the official form attached as a PDF (the form itself is not reproduced), and termite bonds whose renewal invoice is raised once a year ahead of the anniversary.
* **Invoices and getting paid** - per visit, monthly runs or plan installments; pay links through Square, PayPal or Stripe (all off until you switch them on); take payment on the phone with TEG Companion. No overdue reminders or late notices are sent.
* **Customer page** - `[teg-pestcontrol-account]`, signed into with a one-time link by e-mail: upcoming visits, service history, what was applied (product, EPA Reg. No., active ingredient, target, where, who), invoices with pay links, and a re-treat request. Never the access notes.
* **TEG Rover and TEG Companion** - the technicians' phones: today's route, the property card, recording an application from the registry with the label-rate check, the bait-station list, photos and taking payment.
* **Backups, moving to another site, permissions, reports** - nightly backups with an off-site copy, a one-file move to a new WordPress site, a permission matrix per role.

Reviews and ratings: none are asked for (the setting is off by default). Text messages (1.9.0, your own Vonage account): the visit reminder the day before, On my way, and the estimate and invoice links when the office sends them - each off until you switch it on, with quiet hours, STOP / START and a log. No overdue chasing and no review requests by text.

= License =

TEG-PESTCONTROL is licensed like The Eldest Geek's Doctor tools (product "pestcontrol"). A 30-day Pro trial is baked in and starts the first time the plugin runs; a purchased code from theeldestgeek.com is entered under Settings > License. Without a valid license adding and changing records pauses; nothing is lost and everything stays readable and exportable.

== Installation ==

1. Plugins > Add New > Upload Plugin, choose the zip, and activate.
2. TEG-PESTCONTROL > Settings: the firm, Pesticides and the law (the state rules pack), Season and scheduling (re-treats, the mosquito season, the inspection checklist), Money and billing.
3. Add your vans and technicians with their certificates, the product registry, the price list, then customers, properties and plans.
4. Put `[teg-pestcontrol]` on a page for visitors, `[teg-pestcontrol-account]` on another for customers, `[teg-pestcontrol-route]` for the technicians, and `[teg-pestcontrol-pay]` and `[teg-pestcontrol-quote]` on your home page (full list: Help Center > Shortcodes).

== Changelog ==

= 1.14.3 =
* The page shortcodes are renamed: [teg-pestcontrol-estimate] is now [teg-pestcontrol-quote] and [teg-pestcontrol-invoice] is now [teg-pestcontrol-pay]. The old names stop working, so put the new ones on your pages.

= 1.14.2 =
* Fixed: a coupon can no longer be used twice when two people at two tills apply it at the same moment. The second till is asked to try again.
* Fixed: payments from the phone app that you confirm (Zelle, Venmo, PayPal) no longer get stuck if the confirm is interrupted. The shop works out whether the payment was recorded, and if it cannot tell, it shows two "I checked" buttons on the invoice so you decide. A confirmed payment's note now starts with [TEG Companion #number].
* Fixed: a customer import that stopped half-way no longer blocks Undo for ever, and two Undo clicks at once can no longer clash.
* Fixed: a delivery receipt that arrives late no longer takes a text message back from "delivered", and a held text message is never sent twice when two background runs meet.
* Fixed: two site-move imports can no longer start at the same moment.

= 1.14.1 =
* Fixed: the Skip button on a visit now really skips it. Before, it said "Visit skipped" and did nothing. You can type a reason next to it. A visit that is already Done, Skipped or Canceled is not skipped, and the screen says so.
* Changed: Resume on a paused plan puts the paused visits back, from today on, on their route if they were on one, at the plan's current price. Before, the dates stayed empty.
* Changed: a plan billed in monthly or quarterly installments is not billed for the time it was paused. Billing starts again on the day you Resume, so the next installment is raised that day and the installment dates move to it. An installment invoiced before the pause stays as it is.
* Changed: saving a plan's form with the status Paused or Ended takes its coming visits out of the diary, exactly like the Pause button, and saving it as Active again is the same as Resume. A paused or ended plan no longer shows a next-visit date.
* Changed: an invoice past its due date stays Overdue after a part payment, showing what is still owed, until it is paid in full. Before, it turned to Part paid until the next day.
* Fixed: a visit that was skipped or canceled cannot be finished and billed from the route screen, the Companion app or TEG Rover. The crew is told to ring the office, and nothing is invoiced. Finishing the same visit twice no longer bills it twice.
* Fixed: a termite bond renewal can no longer be invoiced twice when two runs overlap, and a renewal that was interrupted is finished the next day.
* Fixed: an estimate that was accepted or declined is not sent again, so its plans cannot be made twice.

= 1.14.0 =
* New: referral offer. Each customer gets a referral code. A new customer who gives it gets the discount you choose off their first visit invoice, and the customer who sent them gets a reward coupon once that invoice is paid. It is off until you turn it on under Settings > Money and billing ("Coupons and the referral offer"), and nothing new shows in the menu until you do.
* New: gift coupons on invoices, also off until you switch them on in the same place.
* Rules that protect you: first visit invoice only; one per person (the same e-mail or phone counts as the same person); nobody can refer themselves; the reward waits until the invoice is paid; and a yearly limit of rewards per customer (12 to begin with, you can change it).
* The offer is for visits, not plans: it never goes on a plan installment or termite bond renewal invoice. A customer who has so far only paid plan installments or a bond renewal still counts as new on their first visit invoice.
* Changed: a finished visit is no longer added to an invoice that carries a plan installment or bond renewal. It gets its own invoice (or joins that day's visit invoice), so on such a day the customer has two invoices.
* The referral code is sent by e-mail only, never by text, and the offer line in invoice and receipt e-mails goes only to customers who ticked "Happy to be told about other services".
* A coupon larger than what is still owed on an invoice is refused, so an invoice cannot end up overpaid.
* Restoring a backup made before this version clears referral records it did not contain.

= 1.13.1 =
* "What's new" no longer opens by itself after an update. The dashboard has a button "What's new in 1.13.1"; press it to read the notes.

= 1.13.0 =
* The TEG Companion and TEG Rover phone apps can show their screens in another language when your shop has the Pro edition and a language pack. This needs the next update of the apps; until then nothing changes.
* A quote or invoice opened on the phone always shows exactly what your customer gets, in the shop language.
* When a visit is put on an invoice, the line is always written in the shop language, whoever marks the visit done.
* Help Center and menu refresh.

= 1.12.0 =
* New Language screen in Settings. Each staff member can choose their own language for the screens they use.
* The shop also has a language of its own for customer documents, e-mails and texts (estimates, invoices, receipts, visit reminders and so on), so what a customer receives no longer depends on who clicked the button.
* The pesticide application record book and the re-entry notice for customers print in the shop language.
* Language packs (Spanish first) will arrive later; downloading a pack needs the Pro edition. With no pack installed everything stays in English, exactly as before.
* A tax label or text message you have not changed yourself now follows the shop language instead of being saved in whatever language was on screen when you pressed Save.
* The decline confirmation on the customer's estimate and plan pages can be translated.
* Texting: the text-message settings are brought up to date with the latest shared texting code.

= 1.11.3 =
* The demo and sample data are now a believable pest control company: real-looking streets and customers, a busy diary with stops on today's routes, finished visits that are billed and paid, signed application records dated the day they were made, five pieces of spray gear with service logs, and a few estimates.
* Wording that belonged to a lawn business is gone: the Visits page now has a Weather section about rain and wind, and the Reports, Equipment and quote pages talk about treatments, sprayers and the shop.
* Plans that are out of season (a mosquito plan in winter) now say "In season from" with the date instead of an empty Next date.
* The Properties list shows each property's address.
* "1 hour" now reads correctly instead of "1 hours".
* The Ways to pay boxes no longer run into their labels.

= 1.11.2 =
* TEG Companion reports can show older months too (this month, last month and up to 10 more; set how many in Companion).

= 1.11.1 =
* Payments: the currency symbol always matches the currency (a US shop never shows £).
* App payments list shows the date your region's way.

= 1.11.0 =
* Dates now follow your region everywhere: 03/14/2026 and 2:05 pm in the United States, 14/03/2026 and 14:05 in the United Kingdom, the country's own way in the European Union (14.03.2026 in Germany) - on screens, prints, e-mails, TEG Companion and TEG Rover. WordPress's own date setting is no longer used. Anything already issued keeps the date format it was issued with.
* TEG Companion is told your date format, so the phone shows dates the same way.
* Payments: card on file for automatic charging (off until you switch it on); a PayPal payment is checked against the bill before it is taken; the Square webhook accepts the www and non-www forms of your address.
* TEG Rover: updates from the shared Rover module (the offline queue on the phone, the pairing form with one kind of phone).
* Backups and the help pages: dates the region's way; help links to small headings land on them.

= 1.10.1 =
* Invoices: An invoice keeps the tax rate it was made with; changing the tax rate in Settings only affects new invoices. Adding labor to an older invoice no longer changes the tax on its visits.
* The customer's invoice page shows the rate next to the tax, for example "Sales tax 8%".

= 1.10.0 =
* Invoices: add labor to an open invoice. "Add labor" on the invoice puts one labor line on it - hours at your hourly rate, shown as "2 hrs @ $60.00 /hr" - and works out the total and tax again; pressing it again adds hours to the same line. The visits, plan installments and bond renewals on the invoice stay exactly as they were charged.
* Invoices: the invoice screen now shows its lines. The labor line can be changed or removed there; the other lines cannot.
* Settings > Money and billing: new rows for the labor line - Labor line (Offered or Off), Hourly labor rate, labor below or above the visits, and Is labor taxable? (No = labor is never taxed). Set your hourly rate before you add labor: it starts at 0.
* The customer's invoice page shows each line as "1 x $45.00" or "2 hrs @ $60.00 /hr". TEG Companion shows the same lines and can add labor from the phone.

= 1.9.2 =
* Square Terminal: a payment cancelled from TEG Companion is only shown as cancelled once Square confirms it; unconfirmed cancels are retried automatically and a forgotten checkout is cancelled after 15 minutes.

= 1.9.1 =
* New: Optimize order on Routes. It suggests a shorter order for a route from road drive times (OSRM, free and keyless, by default; or Mapbox with your own token). It shows the drive time and distance now and with the suggested order, side by side, and changes nothing until you press Accept this order or Keep the current order. An accepted order can be undone while nothing on the route has changed.
* Lock a planned stop to keep it where it is. Started and finished stops, stops with no map position and your depot (set it under Route optimization settings at the foot of Routes) never move. You can also always keep the first or last stop in place.
* If the road service does not answer, the order is worked out nearest-stop-first and the times are estimated from straight-line distance. The suggestion says so.
* Fixed: the old "Put it in a sensible order" button always said there were not enough stops and did nothing. It is replaced by Optimize order, and an old link to it now opens the suggestion.
* Fixed: moving the shop to a new site now keeps the right sender on each text in the text log (1.9.0 kept the old site's user numbers).
* Stops with no latitude and longitude are looked up once (only the street address is sent) and the position is kept on the property. Answers are remembered.
* Updating adds one column to route stops (locked, off for every stop); every route, stop, visit and setting stays exactly as it was. DB 1.4.0 -> 1.5.0.
* Built against the shared route optimization module (WINDOCTOR feat/route-optimize, routing-core 1.0.0, not yet merged there).

= 1.9.0 =
* New: automatic texts through your own Vonage account (TEG-PESTCONTROL > Text messages). Four of them, each off until you tick it: the visit reminder the day before, On my way (from TEG Rover's On the way, TEG Companion or the office), the estimate link when you send an estimate, and the invoice link with its pay link when you send an invoice. No overdue reminders and no review requests.
* Quiet hours (texts written at night wait until morning), STOP / START / HELP answered, and every text in and out in the log. Texting starts switched off and in test mode.
* Customers have a "May be texted" box. Ticking it opts their number in; a STOP from the customer clears it. James Rockford in the sample data may be texted.
* Replies land as a note on the customer's nearest visit, or wait in the Text messages inbox.
* TEG Companion: On my way on the technician's own visit (pestcontrol module 1.1).
* Built on the shared texting module (WINDOCTOR feat/auto-texts, sms-core 1.1.0, not yet merged there). DB 1.4.0 adds only a column and two tables.

= 1.8.1 =
* Square Terminal: "Send to Square Terminal" now shows on the invoice screen under Payments, as this readme describes (Square on, a terminal paired, money still owed). Before, only TEG Companion could send a payment to the terminal.
* Licence screen: the Pro edition is described as what it is, Standard plus TEG Back Office. The old wording listed features Pro does not add.

= 1.8.0 =
* Time clock: technicians press Clock in and Clock out on the new Time clock screen, on the crew route page, under their crew on Routes, or on a visit in TEG Companion. A second clock-in while one is open is refused.
* The office (See crew hours and cost for the whole firm) sees who is on the clock, clocks people in or out, fixes an entry or adds a missed shift. A reason is required, and the entry keeps the old times, who changed it and why.
* TEG Back Office reads the finished hours per technician per day for payroll. The clock itself never pays anyone.
* Reports > What the crews cost and the Reports cards' Sales per staff hour now use the clocked hours. The sample data has a few weeks of time sheets.

= 1.7.0 =
* TEG Back Office: lists your people - the technicians and crew members linked to a WordPress login under Technicians & crews, and the office (tpc_manage holders and administrators) - instead of every user who can open the shop.
* Shared modules brought up to date: payments 1.2.0 (pay-by-QR codes under Ways to pay; a bank transfer can be recorded by hand), Companion 2.13.0 (report card dates follow your date format), Rover 1.8.0 (Device pairing masks IP addresses), site move and licence check.

= 1.6.11 =
* Licence check knows the new TEG Total Auction Management (TAM) product.

= 1.6.10 =
* Back Office shows as Back Office in Setup; the pairing page is called Device pairing everywhere.

= 1.6.9 =
* Fresh installs now get the 30-day Pro trial the readme promised. Earlier zips shipped an empty trial file, so a new site was paused until a licence was entered.

= 1.6.8 =
* The admin menu is grouped the same way as the other TEG shops: Help is now "Help & Tutorials", the phone pairing page is "Device pairing", and Settings is the last row of Setup.
* Field work now sits after Sales & money in the menu, like the other TEG shops.
* Moving the shop to another site keeps who wrote each property note.

= 1.6.7 =
* In the Companion app, Zelle, Venmo and PayPal payments wait for the office to confirm them; a manager can apply them at once.
* Invoices can show pay-by-QR codes (Venmo, Cash App, Zelle) under Ways to pay - Settings > Payments.

= 1.6.6 =
* The sample customer is now James Rockford.
* Licence checks remember a good answer for a while, so a short network problem no longer locks the shop (anti-theft cache).

= 1.6.5 =
* Money in another currency is always written with its own symbol.
* Product names in the licence screen use the new spelling (TEG-DELI, TEG-FOODTRUCK, TEG-BUTCHER, TEG-BAKERY).
* Take payment from TEG Companion charges in the invoice's own currency and refuses a card in a different currency before anything is charged.

= 1.6.4 =
* Money in another currency is written with its own symbol on the TEG Rover cards.

= 1.6.3 =
* Customer links (invoices, quotes, bookings and the like) only open with their exact key; a link with a blank or altered key opens nothing.

= 1.6.2 =
* TEG Rover collects on an invoice in the currency it was issued in, and its cards count one currency at a time.
* Taking a payment on an invoice no longer recalculates it: an invoice keeps the tax and total it was issued with, even after the tax rate or the region changes.

= 1.6.1 =
* Totals and reports now count one currency at a time: after a region switch, money in the old currency is listed apart instead of being added in. The TEG Companion app shows every invoice in the currency it was issued in.

= 1.6.0 =
* The Customer notes box now shows who wrote each property note. A note written in the office shows the office person's name; a technician's note (from the phone, TEG Rover, the crew page or the desktop) shows their name with their crew, for example "Ana (North crew)", and the Technician mark. The same names now show in the Companion app's list of notes on a visit. Notes written before this update still show the crew's name, as before.
* Behind the scenes: the property notes now remember the person who wrote them. Existing sites get this added automatically on update; nothing is lost.

= 1.5.0 =
* Every customer now has one Customer notes box, on the desktop and in the Companion app: the general notes first, then the notes from their visits and properties, with who wrote each one and which came from a technician.
* New: each customer has their own screen. Click a name under Customers to see the details, the properties, the Customer notes box and an Edit form (with the customer's Alerts, which could not be typed on the desktop before).
* The Customer notes box shows the customer's Alerts (in red) and Notes, each property's alerts, getting-in notes, structure notes and notes for the technician, then every note left on a visit or a property: by the phone, the crew's "leaving" note, TEG Rover and the sign-offs, plus the visit notes and what the customer asked for on a re-treat. A crew's note shows the crew's name and the Technician mark.
* New: "A note on a property" on the customer's screen. The technicians see it on every visit to that property.
* In the Companion app, a note can now be written on a customer or an invoice (before, notes could only go on a visit). It shows in that customer's notes. The customer's own Notes field is never added to.
* Getting-in notes, structure notes and notes for the technician stay off the phone's customer screen, as before: the phone shows them only to the technician whose visit it is.

= 1.4.1 =
* Report cards on the phone now open the matching desktop screen: the sales cards open Reports, the money cards open Invoices, estimates open Estimates, re-treats and busy times open Visits, termite bonds open Termite: WDI & bonds, customer cards open Customers and the product cards open the Product registry.
* Card names now fit a pest control firm: "Estimate to acceptance" instead of quotes, "Termite bonds due" instead of memberships, "Re-treats" instead of warranty returns, "Services done" and "Re-treat within 30 days" on the first-time fix card, "Products applied" on the margin card, "Plan installments" in the cash forecast, and "Re-treats due" in follow-ups.
* Clearer date ranges on the cards, such as "October 1" for a single day and "Jan 5-10" for a few days.

= 1.4.0 =
* New in TEG Companion: report cards on the phone. Each person picks the cards they want to see, and the cards are sorted into sections (Money, Customers, Stock and items and more). Only the monthly sales card is on to start with; add the others from the list.
* New: a Reports cards page on the desktop (Sales & money > Reports cards). Compare this month with last month, the same time last year or two dates you choose, set a monthly and a yearly sales goal, and download any card as a CSV file or print the page (or save it as a PDF).
* New cards for a pest control firm: termite bonds coming up for renewal in the next 30 days (and bonds that lapsed lately), re-treats booked against services done, how many services needed a re-treat at the same property within 30 days, call-backs that are due, and plan installments still to be billed in the money-coming-in forecast. Also sales against the products you applied, products nobody has used lately, and how fast your stock turns over.
* New setting: "Lost customers after N days" (Settings > Money and billing, 30 to 730 days, 90 to start with). A regular customer (three or more visits done) with no visit for that long, nothing on the diary and no plan running shows on the "Regulars to call" card, best spenders first.
* New: an optional monthly summary e-mail of your report cards, sent on the 1st for the month just ended. It stays off until an administrator saves it on the Reports cards page.
* Busiest times count every finished visit by weekday, and by hour only when the technician pressed Arrived, so the hours shown are real.
* Fix: the sales figure on the phone and the "Invoiced" figure in Reports now come from the same sum, so they always agree.
* Turning the plugin off now also stops its scheduled e-mails and the daily clean-up of customer sign-in links. They start again by themselves when you turn it back on.

= 1.3.1 =
* Fix: Import from CSV now follows the licence like the rest of the shop (it was usable while the plugin was paused).

= 1.3.0 =
* New: Import from CSV. Bring your customers and the properties you treat over from a spreadsheet or your old software. The importer matches your columns to ours (you can change any match), does a test run first that saves nothing and shows what would happen row by row, and every import can be undone in one click.
* New: sample data you can remove. Settings has an "Add sample data (removable)" button that adds an invented firm beside your own records - customers on quarterly and rodent plans, months of finished visits, invoices and payments, signed application records, bait stations, a termite bond, a WDI report and estimates - so you can try everything out. "Remove sample data" deletes only those records and leaves yours alone.
* New for TEG Rover: errands. Send a driver to pick something up (bait, traps, chemicals) with a place and a list of items; the driver confirms what was spent from the phone and the office sees it under Rover > Errand spending, with a CSV export. Ready-made errand presets get you started. Rover stays off until you switch it on (Phones page).
* Behind the scenes: the database is upgraded automatically the first time the site loads after the update; nothing to do.

= 1.2.0 =
* New: E-mail test mode (Settings > E-mail test mode). Turn it on before going live and every e-mail the site sends - invoices, receipts, reminders, status notes, staff alerts - goes to one address you choose and to nobody else. The subject starts with [TEST to ...] so you can see who it was meant for; the message is exactly what the customer would get. Administrators can switch it from the TEG Companion app too (Settings > E-mail test mode), and a red notice shows on every admin page while it is on. Text messages are not e-mail and still go out.
* TEG Companion: shared Companion core 2.4.0.

= 1.1.3 =
* Square Terminal: on a bill that still owes money, staff can press "Send to Square Terminal" to take the card on the shop's paired Square Terminal; the payment is recorded once and a tip is noted, never billed. Pair the terminal under Settings > Payments.
* Card payments taken on a Clover or Elavon terminal can be recorded by hand (US shops, off until ticked in Settings > Payments). They count as card in the totals, and a whole card number typed into the note is refused.

= 1.1.2 =
* Payments now run on the TEG family's one shared payments engine: money that arrives for a document that no longer owes it is kept as unapplied money for the office to refund or move; a demo site never takes a payment; staff are alerted when a gateway payment is lost; a manual payment is capped at what is still owed; and each bill is locked while a payment is recorded, so two payments at the same moment cannot both land on it.
* Region: the region is inferred only from a currency the shop typed, never from the factory default currency it shipped with.

= 1.1.1 =
* Demo sites never take a real payment: on a demo (Demo mode, or the TEG SHOPS demo) the pay area says This is a demo - no payment is taken, every pay link and webhook is refused and nothing is recorded as paid.

= 1.1.0 =
* Invoice numbers and estimate references are locked unique; the invoice counter is atomic, so two invoices at the same moment never share a number.
* Estimate lines carry How often; an accepted recurring line becomes a plan at that frequency.
* A new installment plan whose start date has passed bills from today; switching back to per visit restores the visit prices.
* Correcting an application moves stock only by what changed.
* Payments: a manual payment cannot exceed what the document still owes; staff are alerted when a gateway payment arrives for a document that is gone.
* Updates: an update whose manifest publishes no SHA-256 checksum is never offered or installed. DB 1.0.1.

= 1.0.0 =
* First release: customers and properties, service plans (initial service, re-treats, mosquito seasons, installments), visits and routes with weather pushes, signed pesticide application records with corrections and refusals and the inspection export, the product registry with label rates, the technician licence register, bait stations and monitors, inspections, termite WDI reports and bonds, invoices with online payment and Take payment in TEG Companion, the customer page with one-time-link sign-in, TEG Rover and the TEG Companion pest control module, backups and moving the shop to another site. Virginia rules pack (every point unverified - check with VDACS).
